...
Menu

24/7: (800) 942-8555

(978) 352-7900

24/7: (800) 942-8555

logo

Military, Fire, Police & Seniors 10% Discount*

*Discount applies to billable labor only. Work order must be less than $500.00 to be eligible.
Cannot be combined with other discounts or proposed signed contract projects.

What to Do When Jewelry Drops Down the Sink - Step-by-Step Guide

what to do when jewelry drops down the sink step by step guide

Oh no! You accidentally dropped your precious jewelry down the sink drain. Don’t worry, there’s still hope to recover it. What to Do When Jewelry Drops Down the Sink – Contact Extreme Plumbing Services in Boston. (978) 352-7900 Follow our detailed guide on using a magnet or accessing the under-sink P-trap to retrieve your valuable items.

Step 1: Try the Easy Way to Remove Jewelry
Remember, do not run water while attempting to retrieve your jewelry. Before dismantling the drain components, try getting your jewelry out from above. Use a magnet or apply gentle force to pull it back up. Here’s how it can be done.

Step Two: Access the Under-Sink P-Trap
If your attempts to retrieve the jewelry from above are unsuccessful, you may need to access the P-trap located under your sink. This is the curved pipe that holds water to prevent sewer gases from entering your home. Here’s how to access it:
First, place a bucket or dish underneath the P-trap to catch any water or debris that may come out during the process. Next, use slip-joint pliers to loosen the nuts on both ends of the P-trap. Once the nuts are loose, carefully remove the P-trap and inspect it for your missing jewelry.
If you can’t find the jewelry in the P-trap, you may want to consider using a plumbing snake or calling a professional plumber for further assistance.

Step Three: Prevent Future Jewelry Mishaps
Once you have successfully retrieved your jewelry or determined it to be lost, it’s important to take steps to prevent future accidents. Consider using a sink drain strainer or mesh filter to catch any small items that may be dropped down the drain. Avoid running water while wearing jewelry and be cautious when handling valuables near the sink.
In conclusion, dropping jewelry down the sink drain can be a stressful situation. However, by following these steps and remaining calm, you may be able to retrieve your valuables or prevent future mishaps.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items:
– Bucket (to catch any water or debris)
– Gloves
– Wrench or pliers
– Flashlight
– Optional: Protective glasses

Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready.

It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them.

When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila!

While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.

Get the Necessary Items for Drain Disassembly

If your initial attempts to retrieve your jewelry from the drain are unsuccessful, it’s time to disassemble the drain. To make sure you’re prepared, gather the following items: – Bucket (to catch any water or debris) – Gloves – Wrench or pliers – Flashlight – Optional: Protective glasses Before you start, remember to turn off the water supply to the sink. Place the bucket below the drain, put on your protective gear, and get ready. It’s also a good idea to take a photo of the components before you take them apart. This will help you during the reassembly process if you’re unsure.

Once you’re ready, it’s time to start disassembling the drain.

Use the wrench or pliers to slowly loosen the compression bolts that hold the P-trap (the curved pipe section under the sink) in place. The P-trap is designed to prevent sewer gas from flowing up through the drain. Make sure to keep the compression bolts in a safe place so you don’t lose them. When you detach the first side of the P-trap, water may come out, so make sure the bucket is directly underneath. Then, loosen the other side and let the water and any other contents flow into the bucket. Use your flashlight to locate your missing jewelry and carefully retrieve it with your gloved hands. Voila! While you have the P-trap removed, use a different sink or a separate bucket of water to rinse and clean it. Then, dry it thoroughly. If you need help reassembling the component, refer to the photo you took earlier. Use the wrench and compression bolts to carefully tighten everything back into place. Once it’s secure, test the drain by running the water slowly and then at full pressure to make sure there are no leaks. Congratulations! You’ve successfully retrieved your jewelry from the drain.

Call an Expert Plumber to Retrieve Your Valuables

If you’re not confident in your ability to take apart your sink drain and then reassemble it correctly without leaks, reach out to a local plumbing company for assistance. At Extreme Plumbing Services, we have over 40 years of combined experience plumbing and servicing Boston residences. Contact us today for swift service so you can get your valuable jewelry back.
Seraphinite AcceleratorBannerText_Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.